SERVICE SHEET
Custom Fencing
Privacy, security, and a property line that looks like it belongs to the house.
Custom fence design, fabrication, and installation, including posts, panels, gates, and finishes for residential yards and driveways.
A custom fence is the edge of the property you see every day. We lay out the line with you, then build posts, panels, and gates for your slope, your sun, and how you actually come and go.
Holes are not dug until corners, gates, and neighbor sight lines are agreed. Posts go to the depth the soil and wind call for. Gates are hung with room to swing, and we come back to tune latches after the new fence has settled.

PRIVACY FENCE
White vinyl along the frontage
Tongue-and-groove panels with flat post caps following the sidewalk line.
Straight runs, clean post spacing, and a level top rail give privacy from the street while keeping the yard open to the house.
WHY HOMEOWNERS CHOOSE THIS SCOPE
Homeowners ask for custom fencing when a builder-grade line sags, a gate drags, or the yard needs privacy that still looks considered from the street.
The line is walked before it is poured
We stake corners, post spacing, and gate swings and walk them with you. Custom fencing should not surprise you with a post in the sprinkler line or a gate that opens into the car.
Panels made for your grade
Sloped yards get stepped or racked runs, not a flat fence forced downhill. Materials and finishes are chosen for sun, wind, and how much upkeep you want on a custom fence.
Gates you will use every day
Hinges, latches, and clearances are selected for the way the gate will be used. After the concrete cures, we make final adjustments so it opens and closes smoothly.

CORNER LOT
Picket fence on a curved frontage
White pickets wrapping a corner lot with fresh sidewalk and lawn.
Posts follow the property line around the turn so the fence reads continuous from the street and meets code height at the corner.

STREET VIEW
Picket run across the front yard
Dog-ear pickets with uniform spacing in front of a landscaped lawn.
The line is set back from the sidewalk with room for beds and irrigation before panels are locked to posts.

WOOD ENCLOSURE
Natural pickets around the backyard
Stained wood pickets forming a rectangular yard enclosure.
Rails follow grade on a flat lot so gates and post heights stay consistent on both sides of the property.
DELIVERABLES
A custom fence project usually includes layout through finish. Height, material, and gate count are confirmed in the estimate before fabrication starts.
- Site layout and permit support
- Post layout and concrete footings
- Custom panel fabrication
- Walk gates and driveway gates
- Hardware, latches, and self-closing where needed
- Stain, paint, or powder-coat finish
PHASES
How custom fencing goes from a property line to a gate that latches.
- 01Measure the yard and review the design
- 02Fabricate panels and order hardware
- 03Set posts and install the fence
- 04Adjust gates and walk the finished line
Ready to discuss custom fencing?
Tell us the run you want fenced and whether you need privacy, a dog gate, or a new driveway entry. We will outline what custom fencing on your lot should include.